CHECK Valves | Cylinders | Fittings | Flow/Speed ControlLers | FiltersGrippersInstrumentationPlastic tubing pressespressure switches regulatorsreservoir canisters reservoir cartridges Orifice restrictorsvacuumvalvesProduct Index | | |

Instrumentation

- Electronic Regulators

- Flow Switches

- Pressure Switches

- Vacuum Switches

Electronic Regulators


IT

Electro-pneumatic regulator series IT has a series for each output flow rate. In addition to the existing conduit entry, a DIN connector is available. A dedicated exhaust port (M5) is installed to remove air from the nozzle. The IT series comes with monitor signal output and shock/ vibration resistance.


ITV

Series ITV electro-pneumatic and electronic vacuum regulators control air/vacuum pressure steplessly in proportion to an electric signal. They are light weight in design with a bright and easy to read LED display. The monitor output is available either as analog output or switch output. The ITV series is IP65 equivalent.


VY1

A hybrid regulator is created from a regulator and a solenoid valve with the electro-pneumatic regulator series VY1. A maximum effective area of 670mm² (2B) can be covered by the combination of an ultra-compact electro-pneumatic pilot valve (22.4 X 30 X 39) and a 3 port, high-capacity exhaust main regulator (VEX1*00 series). Having the amplifier built into the electro-pneumatic pilot valve, only an external (24V DC) power supply and (1 to 5V DC) signal voltage need to be connected making handling simple. Using the VVEXB/2/4 series, a maximum 10 station manifold is possible.

Flow Switches

IF

The paddle style flow switch, series IF3 detects and confirms liquid flow. The series is generally used in fields such as air conditioning, water supply equipment, etc. Enclosures include a standard type for indoor applications away from moisture; drip proof (JIS C0920) which can tolerate water drip in indoor or outdoor applications; and splash proof (JIS C0920) which has a sealed construction that can tolerate hosing or salt laden atmospheres


IFW

IFW series flow switches detect and confirm liquid flow. They are applicable to general industrial machines and various other applications. The IFW series will detect the flow of water and other non-corrosive fluids. The detection range is from 1 to 50 liters per minute. The flow setting can be adjusted with a screwdriver from the outside of the unit without removing the cover.


LFU

Ultrasonic flow sensing technology incorporates a cutting-edge contrapropagating cross-correlation measurement method. This technology is up to 20 times faster than the industry standard "sing-around" method. In addition, the cross-correlation method is much more efficient in data collection and processing, even under adverse conditions with micro-bubbles. The system is an fully integrated technology. By a simple change on the Windows™ utility screen, you can switch from stand-alone sensor mode to closed-loop mode, and with the addition of the LTV20 hybrid regulator, you will be controlling liquid flow with superior accuracy and repeatability. This is accomplished using the same compact controller for either mode, and there is no "hand-shaking" with a separate PID controller.


PF2

Series PF2A for air, PF2W for water, PF2D for deionized water and chemicals. Flow rate setting and monitoring are possible with the digital display. Integrated and remote type displays are available for different types of application. Water resistant construction is used conforming to IP65 protection. Switching from real-time flow rate to accumulated flow is possible.


PFA

Series PFA digital flow switch for air is available in either an integrated or remote style unit. It is selectable from instant flow or integrated flow. Flow rate can be set at 2 independent points. The LED display is clear and easy to read.


PFD

The PFD series is a digital flow switch for deionized water and chemicals. Karman vortex has no moving parts and therefore generates a minimum amount of dust particles. The minimum measurable flow rate is available from 1.6l/min.


PFW

The PFW digital flow switch for water is available in either an integrated or remote style unit. It is selectable from instant flow or integrated flow. The flow rating can be set at 2 points individually. Series PFW has a waterproof construction (equivalent to IP65). The LED readout is clear and easy to see.

Pressure Switches


ISE1000

The IS1000 series is a mechanical style pressure switch. This series has a long life of 5 million cycles. The surface treatment of the body for the IS1000 series pressure switch has changed from a black coating to a black zinc chromate. Function for the new model remains unchanged from the current one even with the change of surface treatment.


ISE3000

Pneumatic pressure switch series IS3000 can be used for small electrical loads of 10mA such as relays and programmable controllers. IS3000 has a high frequency operation of 1 cycle/sec and a long life of 10 million cycles due to piston construction. Calibration ranges from 0.1 to 0.7 MPa.


ISA

The ISA series is a non-contact style air catch sensor for applications requiring confirmation of work present for machining operations. Due to the construction of the sensor, fluctuations in the supply pressure does not influence operations. The ISA series is IP66 rated and is dust proof and drip proof.


ISE1

The ISE1 series is a compact, positive pressure switch available in a single setting with hysteresis adjustment, a double setting/double output type or an analog output type with hysteresis adjustment. The ISE1 is lightweight and the optional plug-in connector makes wiring easy and simple.


ISE2

The ISE2 series is a compact, pressure switch (for positive pressure) and can be integrated with ZX or ZR vacuum systems. The ISE2 series pressure switch has a quick response time of 10mS and the plug connector option makes wiring easy and simple.


ISE3

The ISE3 series is a digital pressure switch (for positive pressure) with LCD readout for general pneumatics purposes. The ISE3 digital pressure switch allows the calibration of two independent outputs. Modular version can be integrated with ZX system.


ISE5

Series ISE5 Digital Pressure Switches are designed for applications requiring the handling of corrosive gases or liquids. ISE5 is designed with a stainless steel diaphragm, two independent outputs, a variety of switch output modes, choice of display units and panel mounting available.


ISE6

The ISE6B series is a digital pressure switch (for positive pressure) with backlight for general purpose fluids. The ISE6B can be used for atmospheric pressure detection and vacuum pressure measurement for load lock chamber in semiconductor production equipment. Panel mounting is available.


ISE30

Series ISE30 high precision digital pressure switch (for positive pressure) with two color digital display allows you to choose the setting according to your application requirements. 4 different display settings are available. Abnormal conditions can be detected at a glance.


ISE40

The ISE40 series is a high precision digital pressure switch. High-speed response time is 2.5ms or less with the anti-chattering function. Stable switch output is possible even with sudden changes in the primary pressure (when operating large bore cylinders, etc.). The auto shift function allows switch output unaffected by variations in primary pressure.


ISE50

Model ISE50 is a standard thread type, high precision digital pressure switch for positive pressure. ISE50 is used for a wide range of fluids. The stainless steel diaphragm prevents direct contact between sensor and measured fluid. Sensor and fittings are electro-beam welded.


ISE60

Model ISE60 is a high precision digital pressure switch for positive pressure. ISE60 uses special fittings (metal gasket seal fittings) for the semiconductor industry. The stainless steel diaphragm prevents direct contact between sensor and measured fluid. Sensor and fittings are electro-beam welded.


ISG

ISG general purpose switch is widely used in machine tool, industrial machines, compressors, chemical plants, power plants, machineries for ships, and for automatic pressure control such as hydraulic, water, liquid and atmospheric pressure.


PS1

The air checker, PS1 series, electronic pressure switch is available for positive pressure and for vacuum. PS1 is extremely compact and lightweight. Dimensions are 13W X 10H X 30L (mm) for standard type without connection part. A 2-wire switch is applicable to either NPN or PNP output.


PSE

Series PSE digital pressure switches allow pressure to be controlled from a remote location. The PSE100 series controller has an easy to read, large, 4 digit LED display. Display units can be easily selected and changed. Series PSE510 is compact and lightweight, allowing the sensor to be mounted where needed. The use of stainless steel for all wetted parts (SUS630 for diaphragm, SUS304 for fitting) allows the PSE520 pressure sensor to be used in a wide variety of gas and fluid applications.

Vacuum Switches

ZSE1

The ZSE1 series is a compact, vacuum pressure switch available in a single setting with hysteresis adjustment, a double setting/ double output type or an analog output type with hysteresis adjustment. The ZSE1 is lightweight and the optional plug-in connector makes wiring easy and simple.


ZSE2

The ZSE2 series is a compact, pressure switch (for vacuum pressure) and can be integrated with ZX or ZR vacuum systems. The ZSE2 series pressure switch has a quick response time of 10mS and the plug connector option makes wiring easy and simple.


ZSE3

The ZSE3 series is a digital pressure switch (for vacuum pressure) with LCD readout for general pneumatics purposes. The ZSE3 digital pressure switch allows the calibration of two independent outputs. Modular version can be integrated with ZX system.


ZSE5

Series ZSE5/ISE5 digital pressure switches are designed for applications requiring the handling of corrosive gases or liquids. Two independent outputs allow the calibration of 2 different setpoints, e.g. change of vacuum pad size requiring different setpoints, or two different supply pressures requiring different pressure confirmation points. Display units can be easily selected and changed, making these switches globally acceptable.


ZSE30

Series ZSE30 is a high-precision, 2-color display digital pressure switch for vacuum. It has raised rubber button controls that are clearly set apart, simple to operate and soft to the touch. Plug in type connectors take the burden out of wiring work and maintenance. Four different display settings are available.


ZSE40

The ZSE40 series is a high precision digital pressure switch. High speed response time is 2.5ms or less with the anti-chattering function. Stable switch output is possible even with sudden changes in the primary pressure (when operating large bore cylinders, etc.). The auto shift function allows switch output unaffected by variations in primary pressure.


ZSE50

Model ZSE50 is a standard thread type, high precision digital pressure switch for compound pressure. ZSE50 is used for a wide range of fluids. The stainless steel diaphragm prevents direct contact between sensor and measured fluid. Sensor and fittings are electro-beam welded.


ZSE60

Model ZSE60 is a high precision digital pressure switch for compound pressure. ZSE60 uses special fittings (metal gasket seal fittings) for the semiconductor industry. The stainless steel diaphragm prevents direct contact between sensor and measured fluid. Sensor and fittings are electro-beam welded.


ZSM1

The ZSM1 series diaphragm type vacuum switch is available in a solid state non-contact or a reed type design. The ZSM1 has a response time of 100 ms. It is lightweight, compact and has a long life. The ZSM1 has a standard shield plate that prevents external interference.